RUK AK MAGWELL FOR RUGER AMERICAN RIFLES IN 7.62x39 AND 6.5 GRENDEL RIFLE RIGHT VIEW

RUK AK Magwell for RUGER™ AMERICAN Rifles in 7.62X39

Occam Defense Solutions
Availability:
IN STOCK!!!
$208.00
(22 reviews)
Width:
1.50 (in)
Height:
2.50 (in)
Depth:
5.00 (in)
Lifetime warranty on materials and craftsmanship.
Current Stock:
Adding to cart… The item has been added
Description

IN STOCK AND SHIPPING!!!

The Ruger™ AMERICAN bolt guns in 7.62X39, .223 (Galil mag use) and 6.5 Grendel are fantastic ranch and prepper rifles, and also are good self defense solutions for those behind enemy lines in ban states.  Unfortunately they take a proprietary magazine that doesn't have many fans.  Enter the RUK magwell.  This 100% MADE IN USA billet badassery enables the user to use MOST AK mags with the RUGER™ AMERICAN.  There's a small amount of shim-fitting (you don't cut anything) to be done, but installation will be cake for most users and most mags.

The body of the magwell is TYPE III billet 6061 aluminium (yes, "alumin-eeum"), with American spring and axis pin.  The mag catch is orderable in a standard stamped American version or our oh-so-slappable FATBOTTOM billet 4140 extended catch. 

FINE PRINT- You can either set up the magwell to run MAGPUL™ mags or (almost) everything else.  AK mags are made in a ton of countries, and some are better than others at being "normal".  The shim-fitting consists of adding shims (washers) until you get good operation with your selection. Korean and KCI mags have intermitent fitment. If you know "right-tighty, lefty-loosie" you can do this install.

Click here for the RUK installation video

User Manual Download

We get a lot of questions about whether the RUK will fit your RUGER™ American Ranch in 7.62X39, .223 (Galil mag use) or 6.5 Grendel.  Here's how to know if it'll fit your particular gun (see also the photo below):

  • If you have a Gen 1 American with the original stock, AND it has a removable magwell that screws into the bottom of the stock, the RUK WILL FIT.
  • If you have a Gen 2 American with the RUGER stock, the RUK WILL FIT.
  • If you have an American with a SHARPS BROTHERS HEATSEAKER chassis, the RUK WILL NOT FIT.
  • If you have a MAGPUL™ HUNTER stock, the RUK WILL NOT FIT.

WILL THE RUK FIT MY RUGER RANCH

 

Reviews

  • 5
    Awesome

    Posted by Michael on Jul 12th 2024

    This product is well made, sturdy, and relatively easy to install. Just follow the directions and test out the ak mags you got. I tested out Romanian/Bulgarian (which worked best) as the KCI/Croatian mags were not as reliable.

  • 5
    Must have upgrade for Ruger American

    Posted by Angel on Jun 13th 2024

    The RUK Magwell is excellent the directions are a little difficult to understand but wacthing a video along with the instructions gets you exactly where you need to be. The magwell works great I adjusted for magpul AK mags and all the other magazines I own cycle rounds just fine with some very minor adjusments to the magazines. Excellent product steps up the game 1000% for the Ruger American rifles!!!

  • 5
    Ruger American ranch

    Posted by Kaleb on Jun 10th 2024

    This has really made my rifle my favorite gun to shoot.the rifle has always shot very well and accurate but the mini 30 mags have always given me problems with this new mag well I can use my Ak mags that I already have and it feed so much smoother no more hang up no more messing with the mag after every shot Best upgrade you can buy for the ruger ranch

  • 5
    Awesome piece of kit

    Posted by Aaron Neal Trout on May 28th 2024

    Installs in minutes. Great fit & finish. This is the way it should have come.