MERC Freefloat Handguard

NEW VERIFIED FITMENTS:

CENTURY/ROMARMS/ROMANIAN DRACO, USE PISTOL LENGTH HANDGUARD AND DRACO GAS TUBE. GAS BLOCK MUST BE REMOVED AND REPLACED AFTER HANDGUARD FITMENT.

DPMS/PANTHER ARMS/PALMETTO ANVIL PISTOL, USE PISTOL LENGTH HANDGUARD AND AKM GAS TUBE. GAS BLOCK MUST BE REMOVED AND REPLACED AFTER HANDGUARD FITMENT.

SAIGA 7.62x39 AND 5.45X39 RIFLES, USE RIFLE LENGTH HANDGUARD AND AKM GASTUBE . MAY REQUIRE MINOR GUNSMITHING SEE DRAWING IN ALBUM HERE FOR BARREL SPECS AND MEASURMENTS.  

Draco variant gas tube back in stock!! Shipping NOW!

MILLED AND US CENTURY GUNS:

18.5mm clamp systems are in stock and shipping NOW!!!

The MERC is a revolutionary patented Free Float rail and thermal isolation improvement to handguards for the AK platform. The MERC offers rock solid optics mounting and hand protection. Gloves are usually not required when deploying the MERC. The MERC is easily installed in less than 30 minutes with commonly available tools. Maximum Effectiveness - Reduced Complexity: The MERC is the New Standard for AK Handguards. This system works on stamped receiver AK-47/74s from Russia, Poland, East Germany, Hungary, Romania, Egypt, and China. It DOES NOT work on Yugos (ZASTAVA).

Milled receivers, and US made Century rifle fit:

We're now making barrel clamps for 18.5mm RSB journaled barrels!  This covers most milled receivers (except Sharps Bros in many cases), some Arsenal stamped guns, some of the SLR-107 variants, and all US made Century AKs.  To know for sure, watch THIS VIDEO.

See this YouTube video to see if your rifle is a good candidate!

Specifications for rifle length: 6061 Aluminum Black Mil-Spec Anodized Length: 11.75" from front of receiver Overhang over dust cover: 3.5" Height: 2-5/8" Width: 1-9/16" Weight: 16 oz. (effectively much lighter through removal of steel RSB and FST) Weight of demo gun: 7 lbs, 2 oz.

Specifications for pistol length: 6061 Aluminum Black Mil-Spec Anodized Length: 8" from front of receiver Overhang over dust cover: 3.5" Height: 2-5/8" Width: 1-9/16" Length from front of the Front Trunnion: 8"

Installation: Installation is simple on most rifles, but we can also refer you to skilled installers who can perform the job quickly and inexpensively.  Please see the videos HERE for more information.